ANALISA PENGARUH PENGGUNAAN MATERIAL KOMPOSIT PADA INTAKE MANIFOLD TERHADAP KONSUMSI BAHAN BAKAR PADA SEPEDA MOTOR

Aris Nurohim, Abd Kadir, Prinob Aksar

Abstract


The purpose of this study was to determine the fuel consumption of the motorcycle Yamaha Vega ZR assembled in 2009 by using the intake manifold with the basic material of the fiber composites. This study
used an experimental method. The sample is a Yamaha Vega ZR motorcycle is assembled in 2009 to number Engines: 5D9-191066. Data collected through the experimental method. The consumption of fuel measured
in static conditions with a measuring glass. Testing is done by measuring the time required by the machine to spend in a given volume of fuel at the 1500 rpm ,2500 rpm and 4000 rpm. Results showed that the difference
in the time required to spend 10 ml of fuel between the use of intake manifold standard with intake manifold fiber composite fibers in the round 1500 rpm is 0.11 minute, the lap 2500 rpm is 0.08 minute and at engine
speed of 4000 rpm is 0.04 minute. The difference in the average time required to spend 10 ml of fuel is 0.07 minute at 1500 rpm until the engine rotation 4000 rpm. Thus, fuel consumption decreases when using the
intake manifold with the basic material of the palm fiber composite intake manifold using standard.


Keywords: palm fiber composites, intake manifold and fuel consumption.


Full Text:

PDF

Refbacks

  • There are currently no refbacks.


Penanggung Jawab: Dekan Fakultas Teknik Universitas Halu Oleo

Pimpinan Redaksi: Aminur, ST., M.Eng

Mitra Bestari: DR. Akhyar, S.T., M.Eng.
Jurusan Teknik Mesin, Fakultas Teknik, Universitas Syiah Kuala, Banda Aceh 

Dr. Muhammad Syukron, S.T.,M.Eng. 
Jurusan Teknik Mesin, FakultasTeknik, Universitas Muhammadiyah, Surakarta

Dr. Eng. Sudarsono, S.T.,M.Eng. 
Jurusan Teknik Mesin, FakultasTeknik, Universitas Halu Oleo, Kendari

Dr. Eng. Lukas Kano Mangalla, S.T.,M.T. 
Jurusan Teknik Mesin, FakultasTeknik, Universitas Halu Oleo, Kendari

Dr. Eng. Nanang Endriatno, S.T.,M.T. 
Jurusan Teknik Mesin, FakultasTeknik, Universitas Halu Oleo, Kendari

Dewan Editor: Ir. H. Ridway Balaka,M.Eng.
Ir. Salimin, M.T.
Muhammad Hasbi, ST., M.T.
Budiman Sudia, S.T., M.T
Jenny Delly, S.T., M.T. 
La Hasanudin, S.S.T., M.T.
Raden Rinova Sisworo, S.T., M.Eng.
Prinob Aksar, S.T, M.T.

Penerbit: Jurusan Teknik Mesin Fakultas Teknik  

Universitas Halu Oleo
Kampus Hijau Bumi Tri Dharma Jl. HEA. Mokodompit
Anduonohu Telp.(0401)3194347.
e-mail : jurnal.enthalpy.uho@gmail.com

e-ISSN: 2502-8944